Dimmer for 110V 7x14.5mm Neon Rope Light ProSelect Neon
The item, suitable for 100V-240V, 400W(Wattage>7W*Meters/0.8), can connect up to 150FT LED Neon Rope Light, with IP65 splash-proof for you to set the controller in an outdoor place.
The controller's inner part is made of a metal–oxide–semiconductor transistor, which controls the current frequency to insure the light illuminates smoothly without flickering.
The remote has different modes and dimming degrees for your choice, with RF(radio frequency control system) to control the light through obstacles, making a convenient use from a max 60ft range when without obstacles and 360° freely.
Please click the Size Guide above to check more specs before your purchase.
1x RF remote(1 CR2025 cell battery not included)
1x RF controller
2x 2-prong pin
1x 10in heat shrinkable tube
Note: The item fits for Shine Decor 110V 7*14.5mm LED Single Color Neon Rope Lights Only.
Remote Pairing With Controller Steps:
1. Unplug the power cord or switch off the power to keep the neon light off.
2. Then hold the "+" button for 5 seconds to 10 seconds, signal light towards the controller.
3. Keep pressing the "+" button(don't remove your finger) and at the same time please plug the light's power cord in.
4. The light starts flashing meaning the pairing is done, you can use the remote to control the brightness now.
<3>. When doing the above pairing step 2, make sure to press the button "+" for longer than 5 seconds, and the signal light towards the controller. Check if your light flashes after you pair it, if still does not work, pair it several times correctly.
1. Each controller connects up to a 150 LED Strip Light.
2. When installing the dimmer's controller, do remember to use the 2-prong pin, the pin's sharp side set into the light, the round side to the dimmer controller's round holes.
3. After silicone glue seals the connections, put strip light's all the connection sides, power cord side, and end tail side indoors or in waterproof boxes to avoid water seeping in.
4. Please always keep the rectifier no matter if you replace the plug with a dimmer or other elements.
USA Warehouse for US Customers- Free Shipping, Tax Free
- It takes 3-5 business day delivery time to Ship products from our USA warehouse to customers in the US.
- An item is usually shipped (via UPS/USPS) the same day or 24 hours after purchase.
- Once the item is shipped out, you will get a CI PDF from us for record.
- You will be updated with the shipping status via our email.
Return Policy for Damaged/Defective Items
- If you found your item was defective unfortunately, we are sorry for the unexpected shopping experience. Please kindly provide the proof of damage and proof of purchase (Picture or Video) to us.
- With the guarantee of accurate and prompt return process, please contact our Customer Support team via mail firstname.lastname@example.org or call at +86 166 8054 7173 within 7 days after delivery.
- Shine Decor will provide a free replacement (Free shipping) or a refund. And If the defective item needs to be shipped back, we will take charge of all the shipping fee (Please inform us the estimated shipping fee, we will pay it to your Paypal before shipping start).
- If the damage is found to be caused by shipping or improper packing, Shine Decor will do the new replacement arrangement with free shipping, while you needn't to ship back the original one.
Please send your return light to the address below:
Min Fang - Annie
4097 Temple City Blvd
CA 91731 United States
+1 909 990 7893
- Send tracking information to Shine Decor via mail email@example.com.
- After we received the return with inspection, we will issue a refund as a refund policy claimed.